Measure noise on an incident

Save a 15-second noise number on an incident while you are at the unit. You need staff access to Incident Reports, and the browser must be allowed to use the microphone. No recording is stored.

ConciergeManagerOpen in app
  1. Open Incident Reports from the sidebar under Security.
  2. Select the incident.
  3. In Noise readings, click Measure noise.
  4. Check Unit.
  5. Under Where are you measuring?, choose Inside complainant's unit, Hallway outside unit, or Other.

    Tip: Other asks Where exactly?

  6. Click Start 15-second reading.

    Tip: If you see Microphone access is blocked, No microphone found, or This browser can't measure sound, allow the microphone for this site and click Try again.

  7. When the reading finishes, click Save to incident.Finished noise reading with Average, Peak, and Save to incident — Measure noise dialog showing Average and Peak in approximate dBA, a note field, and Save to incidentResult: The number appears under Noise readings, with the average, the peak, the unit, and where you measured. The figures are approximate dBA.

Tip: To measure while you file a new report, click Report, then Measure noise, then Add to report. You see Noise reading added — saved with the report. To see every unit's readings, use Look up noise history.

Related articles

  • File an incident report — Create a formal incident record for something that happened at the building. You need a staff account with access to Incident Reports.
  • Read the incident summary — See how many incidents a building had in a date range, compared with the equal period just before it, and which units come up most. You need staff access to Incident Reports.
  • Look up noise history — See the noise readings already saved for a building, grouped by unit. You need staff access to Incident Reports. Readings are numbers only. No recording is stored.

Was this article helpful?

Browse all topics

Can't find what you need?

Contact Support